Yellow Jacket Traps: Instructions for Use

Poison-Free® Wasp & Hornet Killer: Model M604

1. Shake can upside for 15 seconds before each use.
2. If you are dealing with wasps, stand at a safe distance from the nest with back facing wind.
3. Hold can upright and point toward nest opening while spraying.
4. Spray until nest is saturated.
5. Wait a minimum of 48 hours before removing nest.
6. If necessary, repeat these steps.

Yellow Jacket Traps: Model M365

1. Open yellow jacket traps.
2. Pour bait into traps and add water to fill line.
3. Swirl to mix. Note: As yellow jacket traps fill, add water to keep yellow jackets submerged.
4. Dispose of contents, rinse traps and re-bait.
5. Hang yellow jacket traps away from activity and where it will not be exposed to high winds. If there are no catches, change the location of the trap.
6. Do not hang traps near nests.
7. When tending or disposing of yellow jacket traps, make sure trapped yellow jackets are dead.

Note: Yellow jackets are not normally active at night or in early morning. Therefore, this is the best time to place or tend to the trap. In areas of hot temperatures, yellow jackets prefer the morning sun, afternoon shade.

Replacement bait is also available.